Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

332 Fabric OS Message Reference
53-1002149-01
FW-1119
45
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1119
Message <timestamp>, [FW-1119], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of fabric reconfigurations has risen above the high boundary. The
following occurrences can cause a fabric reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
Recommended
Action
Verify that all interswitch link (ISL) cables are properly connected at both ends. Verify that the small
form-factor pluggable (SFP) has not become faulty. An inexplicable fabric reconfiguration might be
a transient error and might not require troubleshooting.
Severity INFO
FW-1120
Message <timestamp>, [FW-1120], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of fabric reconfigurations has changed from a value outside of the
acceptable range to a value within the acceptable range. The following occurrences can cause a
fabric reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1121
Message <timestamp>, [FW-1121], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.