Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

304 Fabric OS Message Reference
53-1002149-01
FICU-1010
39
FICU-1010
Message <timestamp>, [FICU-1010], <sequence-number>,, WARNING, <system-name>, FMS Mode
enable failed due to port(s) with areas 0xFE or 0xFF is(are) connected to
device(s).
Probable Cause Indicates that the Fibre Connectivity (FICON) Management Server mode (fmsMode) was not
enabled because ports with areas 0xFE or 0xFF are connected to devices.
Recommended
Action
Use the portDisable command to disable ports with areas 0xFE or 0xFF.
Severity WARNING
FICU-1011
Message <timestamp>, [FICU-1011], <sequence-number>,, INFO, CFG, <system-name>, FMS mode
has been enabled.
Probable Cause Indicates that the Fibre Connectivity (FICON) Management Server mode has been enabled.
Recommended
Action
No action is required.
Severity INFO
FICU-1012
Message <timestamp>, [FICU-1012], <sequence-number>,, INFO, CFG, <system-name>, FMS mode
has been disabled.
Probable Cause Indicates that the Fibre Connectivity (FICON) Management Server mode has been disabled.
Recommended
Action
No action is required.
Severity INFO
FICU-1013
Message <timestamp>, [FICU-1013], <sequence-number>,, WARNING, <system-name>, Host data
file cannot be resetted to proper size.
Probable Cause Indicates that the file system is too full to create a host data file of the proper size.
Recommended
Action
Create additional room in the file system and initiate a warm recovery.
Severity WARNING