Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

298 Fabric OS Message Reference
53-1002149-01
FICN-1105
38
FICN-1105
Message <timestamp>, [FICN-1105], <sequence-number>,, WARNING, <system-name>,
DevTeraIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Probable Cause Indicates an LRJ from a FICON channel indicates that the channel does not have a path established
to the CU.
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.
Severity WARNING
FICN-2005
Message <timestamp>, [FICN-2005], <sequence-number>,, INFO, <system-name>, FICON VEPort
<VEPort> Feature Change verified Xrc <Xrc> TapeWrt <TapeWrt> TapeRd <TapeRd>
TinTir <TinTir> DvcAck <DvcLAck> RdBlkId <RdBlockId>.
Probable Cause Indicates the configuration was changed manually.
Recommended
Action
No action is required.
Severity INFO
FICN-2006
Message <timestamp>, [FICN-2006], <sequence-number>,, WARNING, <system-name>, FICON
VEPort <VEPort> Feature Change failed Xrc <Xrc> TapeWrt <TapeWrt> TapeRd <TapeRd>
TinTir <TinTir> DvcAck <DvcLAck> RdBlkId <RdBlockId>.
Probable Cause Indicates the FCIP Tunnel ID associated with the FICON tunnel must be down or disabled for a
feature change to become effective.
Recommended
Action
Disable the applicable FCIP tunnel to make the feature change effective.
Severity WARNING
FICN-2064
Message <timestamp>, [FICN-2064], <sequence-number>,, INFO, <system-name>, Ingress
Abort:Oxid=0x<the OXID of the aborted exchange>:Unknown Path on
VEPort=<VEPortNumber> from SID=0x<Source Domain><Source Port> to
DID=0x<Destination Domain><Destination Port>.
Probable Cause Indicates an abort operation has been received from a local FC interface for an exchange.