Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

96 Fabric OS Message Reference
53-1002149-01
C3-1013
12
C3-1013
Message <timestamp>, [C3-1013], <sequence-number>,, INFO, <system-name>, Maximum wait
cycles to recover the lost frame or credit is exceeded on the internal Port Slot
<slot number>,P<port number>(<blade port number>) m_rdy(0x<Multiple Credit(s)
Lost>)/m_frame(0x<Multiple Frame(s) Lost>).
Probable Cause Indicates that wait cycles to recover the lost frame or credit is exceeded on the specified port.
Recommended
Action
Whenever this error is observed persistently, power cycle the faulted blade. If the problem persists,
replace the blade.
Severity INFO
C3-1014
Message <timestamp>, [C3-1014], <sequence-number>,, WARNING, <system-name>, Link Reset on
internal Port S<slot number>,P<port number>(<blade port number>) vc_no=<vc
number> crd(s)lost=<Credit(s) lost>.
Probable Cause Indicates that one or more credits are lost and the link is reset.
Recommended
Action
Whenever this error is observed persistently, power cycle the faulted blade. If the problem persists,
replace the blade.
Severity WARNING
C3-1015
Message <timestamp>, [C3-1015], <sequence-number>,, WARNING, <system-name>, Port
re-initialized due to Link Reset failure on internal Port S<slot number>,P<port
number>(<blade port number>).
Probable Cause Indicates that the port is re-initialized due to Link Reset failure.
Recommended
Action
Whenever this error is observed persistently, power cycle the faulted blade. If the problem persists,
replace the blade.
Severity WARNING
C3-1016
Message <timestamp>, [C3-1016], <sequence-number>,, ERROR, <system-name>, Port is faulted
due to port re-initialization failure on internal Port S<slot number>,P<port
number>(<blade port number>) with reason <port fault reason>.
Probable Cause Indicates that the port failed due to port re-initialization failure.
Recommended
Action
Whenever this error is observed persistently, power cycle the faulted blade. If the problem persists,
replace the blade.