Event Monitoring Service Version A.03.
Legal Notices The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Event Monitoring Service Version A.03.20 Release Notes Announcements 1 Event Monitoring Service Version A.03.20 Release Notes Announcements Version A.03.20 of the Event Monitoring Service (B7609BA), includes media, license and manual. Version A.03.20 runs on HP-UX 10.20 and HP-UX 11.0. It is available for HP 9000/Series 700 and 800. The Event Monitoring Service (EMS) together with one or more EMS monitors is a tool you can use to monitor various system resources.
Event Monitoring Service Version A.03.20 Release Notes What’s New in this Version • The MIB Monitors: — HA Cluster Monitor checks the status of ServiceGuard clusters, nodes, or packages and services. — HA Network Interface Monitor reports the status of LAN interfaces. — HA System Resource Monitor checks the number of users, system load, and file system space.
Event Monitoring Service Version A.03.20 Release Notes What’s New in this Version Further Information On-line versions of user’s guides and white papers for high availability products are available on Hewlett-Packard’s HP-UX Documentation web page: http://docs.hp.
Event Monitoring Service Version A.03.20 Release Notes Compatibility Information and Installation Requirements Compatibility Information and Installation Requirements EMS should be installed on each node that you want to monitor. It does not need to be installed on the management station, unless you want to also monitor the management station itself. Compatibility with HP-UX Releases Table 1-1 EMS Hardware and HP-UX Compatibility EMS Version Compatible HP-UX Releases Compatible Hardware EMS A.01.
Event Monitoring Service Version A.03.20 Release Notes Compatibility Information and Installation Requirements Table 1-2 EMS MC/ServiceGuard Compatibility EMS Version HP-UX Release ServiceGuard Version A.02.00 HP-UX 11.00 MC/ServiceGuard A.11.01, A.11.03 HP-UX 11.00 MC/LockManager A.11.01, A.11.02, A.11.03 HP-UX 10.20 MC/ServiceGuard A.10.11, A.10.12 HP-UX 11.00 MC/ServiceGuard A.11.04, A.11.05, A.11.07, A.11.08, A.11.09 A.03.00, A.03.00.01, A.03.10, and A.03.20 MC/LockManager A.11.04, A.11.
Event Monitoring Service Version A.03.20 Release Notes Compatibility Information and Installation Requirements support EMS logging facilities. Memory Requirements EMS requires approximately 3 Mb of memory to execute. Installing the Event Monitoring Service EMS checks the resources for local systems only. EMS is most effective when installed and configured on all systems in your environment. EMS should be installed on each node that you want to monitor.
Event Monitoring Service Version A.03.20 Release Notes Compatibility Information and Installation Requirements 1. Create a network depot according to the instructions in Managing HP-UX Software with SD-UX. 2. rlogin or telnet to the remote host on which you are installing EMS. 3. Install over the network from the depot. Your requests are retained, when monitors are updated, or when you re-install a monitor on top of an existing monitor. This is part of the functionality provided by the persistence client.
Event Monitoring Service Version A.03.20 Release Notes Patches and Fixes in this Version Patches and Fixes in this Version This section describes patches that are required and defects that have been fixed in version A.03.20 of Event Monitoring Service. Required and Recommended Patches No patches are required for EMS A.03.20 itself. However, the following patches (or their supersedents) are recommended for dependencies of EMS. This list is subject to change without notice.
Event Monitoring Service Version A.03.20 Release Notes Patches and Fixes in this Version Table 1-5 lists defects that have been fixed in EMS A.03.20: Table 1-5 Corrected Defects SR Number Problem and Resolution JAGab77628 ServiceGuard package package_status is not reported on nodes whose state is failed. In Version A.03.20, EMS added a new state to the package monitor: UNAVAIL.
Event Monitoring Service Version A.03.20 Release Notes Known Problems and Workarounds Known Problems and Workarounds The following are known problems and suggested workarounds with the EMS: JAGab77527: EMS client may fail to connect to the registrar What is the problem? An EMS client may fail to connect to the EMS registrar. If this occurs, you may see a message in /etc/opt/resmon/log/client.log like this one: -------------------Start Event-------------------Event 11 occurred at Tue Oct 19 15:53:24.
Event Monitoring Service Version A.03.20 Release Notes Known Problems and Workarounds registrar 1712/tcp # resource monitor service Then enter inetd -c to reconfigure inetd. 2. Retry running the client that failed. JAGab77759: ServiceGuard package service status is reported incorrectly What is the problem? /cluster/package/service_status/ / may be incorrectly reported.
Event Monitoring Service Version A.03.
Event Monitoring Service Version A.03.20 Release Notes Known Problems and Workarounds /etc/opt/resmon/lbin/registrar After you have confirmed both registrar requirements, reconfigure inetd by executing: inetd -c • Add the /etc/services file to the lookup path your name lookup service uses. For example, modify the nsswitch.conf file to refer to /etc/services if you are running NIS.
Event Monitoring Service Version A.03.20 Release Notes Known Problems and Workarounds To change the Enforce Dependency Analysis Errors through the swinstall GUI, follow the steps below: 1. Cancel out of the Analysis. 2. From the Software menu, select Options, then Change. Click OK. 3. Scroll to the box for Enforce Dependency Analysis Errors in Agent and click to remove the check mark. Click OK. 4. From the Action menu, select Install. The Status returns: Ready with Errors.
Event Monitoring Service Version A.03.20 Release Notes Software Availability in Native Languages go to http://docs.hp.com and click HP-UX Operating System. Refer to the following manuals: • Managing HP-UX Software with SD-UX • HP-UX Reference: See swinstall (1M) Software Availability in Native Languages Event Monitoring Service, Version A.03.20, is available with documentation in American English or Japanese. (The interface is available only in American English.
Event Monitoring Service Version A.03.
