HP StorageWorks Enterprise Virtual Array updating product software guide (XCS 09522000) (576287-003, October 2010)

1. Connect a server with a CD drive to the management module port (1, Figure 7) on the controller
enclosure.
Figure 7 Management module
.
2. Insert the installation CD into the drive.
3. Open a browser and browse to the WOCP (Web-based Operator Control Panel):
https://HP EVA storage system IP address:2373
NOTE:
• If you are running a version of management module software earlier than 0001.1000
(which corresponds to XCS 09004000 or earlier), use port 2372.
• If you have not previously set the IP address for the management module, the default is
192.168.0.1.
• If you have not previously completed the initial setup for the management module, see
“Connecting to the management module (initial setup)” in the Web-based operator
panel user guide .
The WOCP login window appears.
4. Log in as an HP EVA administrator (user name admin and the password).
The WOCP GUI appears.
5. In the navigation pane, select Update management module firmware.
The Update Management Module Firmware window opens.
6. Click Browse and browse to the installation CD.
7. Select the ABM.pkg file and then click Next step.
8. Follow the online instructions and then click Finish. A confirmation window opens.
Pre-upgrade tasks40