HP Enterprise Virtual Array 6400/8400 Expansion Rack Reference Guide (5697-1818, March 2012)

Figure 9 Move retaining bracket to back
4. After attaching the rail, grab and move the rail gently to be sure it is firmly engaged in the
rack and that all latches are engaged in the rack holes.
5. Repeat Step 1 through Step 4 for the other rail.
Installing the disk enclosure
1. Remove the bezel covers from each side of the enclosure (see Figure 10 (page 13)).
CAUTION: Be careful when removing the bezel covers so as to not break the locking tabs
that secure the covers to the enclosure.
Figure 10 Remove bezel cover
2. Align the enclosure with the rails and slide it into the rack.
Installing the disk enclosure 13