HP StorageWorks EVA4000 SAN Starter Kit Release Notes (5697-6628, April 2007)

Emulex EZPilot
EZPilot is used d
uring installation of the EVA4000 SAN Starter Kit to simplify SAN configuration. EZPilot
can also be used
to perform basic storage provisioning tasks, such as creating and deleting virtual disks.
HP Command View EVA
HP Command View EVA is a tool for managing all aspects of storage system operation. In addition
to provisioning, HP Command View EVA enables you to monitor the storage system and troubleshoot
problems.
Table 2 identifies the supported management tasks.
Table 2 Supported management tasks
Task EZPilot HP Command
View EVA
Manage virtual disks
Yes Yes
Manage disk groups
No
Yes
Manage HBAs
Yes
No
Manage Fibre Channel switch
Yes
No
View storage system status Yes Yes
Manage replacement of hardware
No
Yes
Access controller event logs
No
Yes
Upgrade storage system firmware
No
Yes
Shut down/re
start storage system
No
Yes
Manage data replication
No
Yes
Installation instructions
For informa
tion about installing the EVA4000 SAN Starter Kit, see the following:
• HP StorageWorks EVA4000 SAN Starter Kit quick installation
• Emulex EZPilot User Manual
CAUTION:
When insta
lling the EVA4000 SAN Starter Kit, be sure to use the EZPilot installation CD, which installs
all of the r
equired components. Do
not use any of the other installation CDs included with the product;
doing so will disrupt the installation process.
Installed components
Table 3 identifies the components installed on the server for each EZPilot installation configuration.
4