8000 Enterprise Virtual Array Updating Product Software Guide XCS 5.031 (5697-5541, December 2005)

If HP SANworks Network View software is installed on your Storage Management Appliance, you must

migrate your Network View environment into HP OpenView Storage Area Manager.

For instructions on how to remove Network View from the Storage Management Appliance, refer to

the “ Uninstalling SANworks Applications” section in the HP OpenView Migrating Storage Resource

Manager, Storage Allocation Reporter, and Network View to Storage Area Manager Application Notes.

Step 13: Insta

lling Storage Node Manager (optional)

You can instal

l Storage Node M anager on your Storage Ma nagement Appliance, after you have installed

HP Command View EVA 4.1. When you install Storage Nod e Manager, you must also install the EVA

Device Plug-In (DPI). The DPI enables Storage Area M anager to support the Enterprise Virtual Array.

Refer to the HP OpenView Storage Area Manager 3.2 Installation G uide for information on how to

prepare for and install the Storage Node Manager component.

NOTE:

The DPI is not

deliveredontheStorageAreaManagerCD.YoucandownloaditfromtheStorage

Area Manager

DPI web site: h

ttp://www.openview.hp.com/products/dpi. Refer to the

HP OpenView

Storage Are

a Manager EVA Device Plug-In Installation Instructions

for information on how to plan

and install the DPI.

Step 14: Disabling SNMP notiﬁ cation to the PRS host

Some Enterprise Virtual Arrays run the Proactive Remote Services (PRS) software to identify potential EVA

hardware problems. PRS sends information about hardware problems to an HP Customer Support

Center, which provides a solution.

The PRS software, prior to EV A 3.0, used trap-based SNMP notiﬁcation to report event information about

the EVA. With the release of Enterprise Virtual Array 3.0xx, customers are encouraged to upgrade their

event reporting functionality with the following tools: Proactive Remote Services (PRS) 5.0 and We b-Based

Enterprise Services System Event Analyzer (W E B ES-SEA) 4.3.

HP recommends that you to upgrade event reporting functionality with the following tools: Proactive

Remote Services (PRS ) 5.0 and Web-Based Enterprise Services System Event Analyzer (W EB ES-SEA) 4.3.

NOTE:

In some regions, such as Europe, the Middle East, and Africa, the EVAs run Event Viewer EVA (EVE)

2.0 and Instant Support Enterprise Edition (ISEE) A.02.50 daVinci instead of WEBES-SEA and PRS as

their remote error notiﬁcation solution. If an EVA is using EVE a nd ISEE, an HP-authorized service

representative must still disable SNMP-trap notiﬁcation to the PRS host.

updating product software guide XCS 5.031