8000 Enterprise Virtual Array Updating Product Software Guide XCS 5.031 (5697-5541, December 2005)

Figure 31 E

nable Password Access to a Storage System page

5. Select the World Wide N o de Name of the storage system for which you want to enable password

access.

6. Type the password in the Password and Conﬁrm password ﬁelds.

NOTE:

MakesureyouusethesamepasswordyouenteredintotheHSVcontrollerOCP.

7. Click Ena bl e Password.

A message box opens.

8. Click OK.

HP Command View EVA enables password access to the storage system.

Step 10: Installing SMI-S EVA (optional)

The Storage Management Initiative Speciﬁcation (SMI-S) is a standard interface sponsored by the Storage

Networking Industry Association (SNIA). SMI-S enables HP and other storage vendors to develop products

to a single standard and eliminates the need for custom or manual integration of HP storage solutions in

multivendor environments. You can install SMI-S EVA 4 .1 after installing HP Command View EVA 4.1.

Complete information on installing and conﬁguring SMI-S EVA is included in the HP StorageWorks

Command View EVA installation guide.SeeTable 1.

Step 11: Upgrading Replication Solutions Manager (optional)

If Replication Solutions Manager (RSM) is installed, you must upgrade it to version 1.2. RSM is an

optional interface for HP Business Copy EVA and HP Continuous Access EVA.

Complete information on installing and using RSM is included in the H P StorageWorks Replication

Solutions Ma n ager installation and administrator guide.SeeTable 3.

Step 12 : Migrating Netw ork Vie w to Storage Area Manager

Estimated time to complete: 45 minutes

Upgrading the Enterprise Virtual Array