HP StorageWorks 4000/6000/8000 Enterprise Virtual Array Updating Product Software Guide XCS 5.031 (5697-5541, December 2005)

Upgrading firmw a
re on individual drives
Contact your HP-
authorized service representative for further information.
Step 9: Adding passwords to the HSV controllers (optional)
Estimated t ime to complete: 15 minutes
Use the following procedure to add a password to the HSV controller pair.
NOTE:
When you add a system password to the controller, you must also enable password access in the HP
Command View EVA with access to this system.
Using the OCP on the HSV controller:
1. With either of the default m enus (Storage System Name or World Wide Name) displayed, press
three times to display System Password.
2. Press
to display Change Password?
3. Press Enter for yes.
The default password, AAAAAAAA,isdisplayed.
4. Press
or to select the desired character.
5. Press
to accept this character and select the next character.
6. Repeat the process to enter the remaining password characters.
7. Press Enter to enter the password and return to the default display.
8. Enable password access to the storage system in H P Command View EVA.
Enabling passw or d access in HP Command Vie w EVA
Estimated t ime to complete: 10 minutes
To enable password access to a storage system, per form the following steps:
1. Start HP Command View EVA in your browser.
2. Click Agent Options in the Session pane.
The Management Agent O ptions page opens.
3. Click Storage system p assword access.
The Storage System Password Access page opens.
4. Click Enable.
The Enable Password Access to a Storage System page opens.
updating product software guide XCS 5.031
43