8000 Enterprise Virtual Array Updating Product Software Guide XCS 5.031 (5697-5541, December 2005)

Figure 17 Storage System Password Access page

4. Click Disable.

The Disable P

assword Access to Storage System page opens.

Figure 18 Disable Password Access to Storage System page

5. Select the storage system World Wide N o d e Name from the drop-down list.

NOTE:

Make sure you select the storage system from which you cleared passwords using the

OCP on the HSV controller.

6. Click Disable Password.

Aconﬁrmation box opens.

7. Click Yes to disable the password.

Step 6: Upgrading HP Command View EVA

HP Command View EVA 4.1 is required with VCS 3.028XCS 5 .031. F or information on installing

HP Command View EVA, refer to the HP Command View EVA installation guide.SeeTable 1.The

installation process is similar for e ach of the management conﬁgurations.

Table 9 identiﬁes the upgrade paths to HP Command View EVA 4.1.

NOTE:

If you use the SMA , upgrade to Storage M anagement Appliance software 2.1 before you upgrade to

HP Command View EVA 4.1. See “Step 3: Upgrading the Storage Ma n agement Appliance”formore

information.

Upgrading the Enterprise Virtual Array