HP StorageWorks 4000/6000/8000 Enterprise Virtual Array Updating Product Software Guide XCS 5.031 (5697-5541, December 2005)

Step 5: Clearing
passwords on the HSV controllers
Estimated time to complete: 2minutes
If you use passwords on the HSV controllers, clear the passwords before you upgrade HP Command View
EVA . You can reestablish the passwords after you complete the H P Command View EVA upgrade. Use
the following procedure to clear the storage system passwords on the HSV co ntrollers.
NOTE:
When you clear
a system password on the controller, you must also disable password access from the HP
Command View EVA used to manage this storage system.
Using the Operator Control Panel (OCP) on the HSV Controller:
1. Press
fourtimestoscrolltotheSystemPasswordmenu.
2. Press
to display Change Passw ord?.
3. Press
to scroll to Clear Pa ssword.
4. Press
to display Clear Password.
5. Press Enter to clear the password.
The Password cleared message will be displayed.
The password is cleared. The system automatically returns to the default display (WWID).
6. Disable password access to this storage system in HP Command View EVA.
Disabling password access in HP Command View EVA
Estimated t ime to complete: 10 minutes
To disable password access to a storage system in HP Command View EVA, perform the following steps:
1. Start HP Command View EVA in your browser.
2. Click Agent Options in the Session pane.
The Management Agent O ptions page opens.
Figure 16 Managem ent Agent Options pag e
3. Click Storage system p assword access.
The Storage System Password Access page opens.
updating product software guide XCS 5.031
31