HP StorageWorks 4000/6000/8000 Enterprise Virtual Array Updating Product Software Guide XCS 5.031 (5697-5541, December 2005)
Changing the def
ault maximum log size
The default max
imum log file size for the Storage Management Appliance software 2.1 is 16 MB for
the Event log an
d 8 MB for the Audit log. Previously in 2.0, the maximum log file size was 512 MB for
both logs.
CAUTION:
If you have Audit or Event log files that are larger than the new maximum sizes, and you want to retain
them, back up the logs before you upgrade the Storage Management Appliance software from 2.0 to
2.1. The Storage Management Appliance software will delete the log files if they exceed the default
maximum size
s.
Upgrading the Storage Management Appliance software from 2.0 to 2.1
Perform the following steps to upgrade the Storage Ma nagement Appliance Software from 2.0 to 2.1.
CAUTION:
You cannot update the Storage Management Appliance software using a Terminal Services session. You
must log i n to the Storage M anagement Appliance software using a remote browser.
1. From a client computer, start a We b browser and browse to the Stora g e Management Appliance,
using the following format:
https://<host_name>/
NOTE:
The default appliance name for a Storage Management Appliance (hardware version 1.0)
begins with
swma
and includes the last 6 characters of the appliance serial number.
IftheStorageManagementAppliancesoftwarewasrestoredusingtheQuickRestoreCD
2.0,thenthedefaultappliancenamebeginswith
sma
and includes all 12 characters
of the appliance serial number.
ThedefaultappliancenameforaStorageManagementApplianceIIbeginswith
sma
and
includes all 12 characters of the appliance serial number.
The d efault appliance name for a Storage Management Appliance III begins with
sma
and
includes all 10 characters of the appliance serial number
The serial number is displayed on a sticker which is usually pasted to the lower right side of
the appliance (when viewed from the front).
2. Log in to the Storage Management Appliance software using a valid user name and password.
NOTE:
You must have administrator privileges.
3. InserttheStorageManagementAppliancesoftware2.1UpdateCD-ROMintotheCD-ROMdriveof
the Storage Management Appliance.
4. Click Settings in the tool bar.
The Settings page opens.
26
Upgrading the Enterprise Virtual Array