HP EVA Storage Replication Adapter Software for VMware vCenter SRM Administrator Guide

7. Repeat steps 1 through 6 on the second SRM server located in the other site.
Note that the password for HP P6000 EVA SRA Software version 5.0 -Storage Admin Portal can
be changed by running the Password Management Utility that is installed with the adapter. The
Password Management Utility can be launched from the Windows Start menu: Start > All Programs
> Hewlett-Packard > HP P6000 EVA Storage Replication Adapter Software for VMware vCenter
SRM version 5.0 -Storage Admin Portal > Password Manager Utility
Once the password has been changed using the Password Management Utility, be sure to update
the array manager configuration information from within SRM with the changed password.
Figure 13 Password Manager Utility
.
Pairing SRM sites
To pair the protected and recovery sites in SRM, follow the instructions in the VMware Site Recovery
Manager Administration Guide.
Configuring SRM to communicate with HP P6000 EVA Storage
After you have connected to the protected site and recovery site, you must configure their respective
array managers so that SRM can discover replicated devices, compute datastore groups, and initiate
storage operations:
1. From the SRM GUI, select the SRAs tab to ensure that the HP P6000 EVA Replication Adapter
for VMware Site Recovery Manager has been installed and is recognized by SRM (see Figure
14).
HP P6000 EVA Storage Replication Adapter Software for VMware vCenter SRM version 5.0 21