HP StorageWorks Windows Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide (AA-RUGZB-TE, October 2003)

Installing the Windows Kit
23Windows Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide
Running the Fibre Channel Utility
After updating the FCA driver, you may run the Fibre Channel utility to view the
current configuration or modify the configuration.
1. Click Solution Software for Windows NT/2000/Server 2003 on the first
screen.
2. Click Run Fibre Channel Utility which adds the appropriate Registry
settings for the driver.
3. Select the options for your configuration and click OK.
4. Restart the server if any changes were made using the Fibre Channel Utility.
Installing the Storage System Scripting Utility
The following SSSU install procedure assumes that you have loaded the web kit to
a CD-ROM.
1. Insert the Windows NT/2000/Server 2003 Kit V3.0B for Enterprise Virtual
Array CD-ROM. If autorun is enabled, the installation program starts.
Otherwise, navigate to the root of the CD-ROM and double-click the file:
Launch.exe.
2. Click Solution Software for Windows NT/2000/Server 2003 on the first
screen.
3. Click Install SSSU.
The installation wizard starts.
4. Follow the instructions to complete the installation.
You can run SSSU directly from the kit. The SSSU executable is located in the
SSSU directory on the kit. Also, you can copy the executable to your server and
run it from a directory of your choosing.
Upgrading a V2.0 or V3.0 Server to V3.0B
Follow this procedure to upgrade an existing V2.0 or V3.0 host server to V3.0B.
1. Upgrade the Virtual Controller Software (VCS) and the Command View EVA
software from V2.00X to V3.0 (see the upgrade instructions that came with
the VCS kit).
2. Upgrade the server’s Secure Path software (see the latest upgrade instructions
that came with the Secure Path software).