HP StorageWorks Tru64 UNIX Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide (AA-RUGPB-TE, October 2003)

Installing the Tru64 UNIX Kit
22 Tru64 UNIX Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide
Installing the Storage System Scripting Utility
The following SSSU install procedure assumes that you have loaded the web kit to
a CD-ROM.
1. Insert the Tru64 UNIX Kit V3.0B for Enterprise Virtual Array CD-ROM.
2. Enter the following command to extract the file (for V5.x):
# mount –r –t cdfs –o rrip /dev/disk/cdrom0c /mnt
Note: Substitute your CD device for cdrom0c, if necessary.
3. Change directories on the CD-ROM by entering:
# cd /mnt
4. Enter the following command to run the installation program:
# setld –l .
Note: The –l is a lowercase L.
The installation asks if you want to install the listed subsets.
5. Enter the corresponding number of the software and press Return.
6. Select option y and press Return.
7. The SSSU executable is installed in the following directory:
#/usr/opt/ENTP003/sbin
To execute SSSU:
■ Command line version—simply type: #sssu
Checking the Tru64 UNIX Driver Version
The FCA device driver for Tru64 UNIX (Emx) is installed as part of the operating
system. You may wish to check the version to ensure compatibility with the
Enterprise Virtual Array (see the platform-specific release notes for supported
versions).