HP StorageWorks Sun Solaris Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide (AA-RUH4B-TE, October 2003)

Testing Connections to the Enterprise Virtual Array
29Sun Solaris Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide
Adding hosts through the Command View EVA software consists of adding
each FCA adapter installed in the host. The first step uses the Add Host
function, and each subsequent adapter uses the Add Port function. Ensure
that you add a port for each active FCA.
2. Add the host from the Command View EVA.
3. Ensure that the host FCAs have been added by inspecting the Host folder in
the Navigation tree of the Command View EVA.
Creating and Presenting Virtual Disks
This section describes how to create and present additional virtual disks to host
servers and verify that the hosts can access them.
1. Create a virtual disk family on the Enterprise Virtual Array using the
Command View EVA.
2. Set values for the following:
■ Virtual Disk Name
■ Vraid level
■ Size
■ Present to Host (preferably to the host you just created)
3. If you chose a specific LUN on the Virtual Disk Properties page, you are
prompted to select a LUN number.
4. Run Secure Path Manager (spmgr).
Please check
http://h18006 .www1.hp.com/products/s anw orks/s ecure-path/solaris .html for the
latest instructions regarding Secure Path for Sun Solaris and using spmgr.