HP StorageWorks IBM AIX Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide (AA-RUHAB-TE, October 2003)

Installing the IBM AIX Kit
29IBM AIX Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide
Note: If you are running any other storage, such as an MA8000, do not remove
Secure Path.
Installing in an Existing Environment
Refer to your Secure Path documentation to ensure that you have the correct
version for your configuration.
Once you have met the prerequisite criteria, follow these steps:
1. Insert the IBM AIX Kit V3.0B for Enterprise Virtual Array CD-ROM.
2. If a directory called /cdrom does not exist, create it with the command:
mkdir /cdrom
3. Find your CD-ROM device by issuing the command:
lsdev -Cc cdrom
The CD-ROM device is probably cd0 or another similar looking device
4. Mount the CD-ROM by issuing the command:
mount -rv cdrfs /dev/cd0 /cdrom
Where /dev/cd0 is your CD-ROM device and /cdrom is the directory
where you want to mount the CD-ROM. These parameters may vary from
machine to machine.
5. Change directory to the CD-ROM directory.
cd /cdrom
6. Execute the command: ./INSTALL
7. Answer n when you are prompted with the following inquiry:
Are you using a single path configuration?
When prompted, you can search for new devices, but this is optional.
The software that was just installed can be removed by issuing the Command:
/usr/sbin/hp_hsv_uninstall or by mounting the platform kit CD and
issuing the UNINSTALL command.
This completes the installation of the Enterprise Virtual Array kit in an existing
environment.