HP StorageWorks HP-UX Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide (AA-RUHKB-TE, October 2003)

Additional Host Considerations
36 HP-UX Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide
Figure 2: Cabling hosts to switches
For more information about connecting storage system components, refer to the
HP StorageWorks SAN Design Reference Guide.
Working with Clusters
Clustering is the connecting of two or more computers together in such a way that
they behave like a single computer. Clustering is used for parallel processing, load
balancing, and fault tolerance.
The supported clustering software for HP-UX is MC/Service Guard. See the
platform-specific release notes for the specific version of the supported clustering
software.
Be sure to install the HP-UX Kit on each server in the cluster. Refer to the
documentation that came with the clustering software for more specific
information.
Expanding Volumes
You can increase the volume size of the virtual disk with Command View EVA.
You simply change the size parameter in the particular virtual disk’s property
page.
HP-UX does not support dynamically growing a virtual disk volume. If you need
to increase the size of a virtual disk, use the workaround that follows:.
SHR-2457A