HP StorageWorks HP-UX Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide (AA-RUHKB-TE, October 2003)

Installing the HP-UX Kit
24 HP-UX Kit V3.0B for Enterprise Virtual Array Installation and Configuration Guide
Downloading the Host Kit Software from the Web
The HP-UX Kit V3.0B for Enterprise Virtual Array is available for download
from
http://www.hp.com/go/evaplatformkit/. You can save the software to your
computer or create a CD-ROM. Platform Kit software is stored on the download
website based on operating system. Follow the steps below to obtain the software
from the website.
1. Go to
http://www.hp.com/go/evaplatformkit/ .
2. Select the kit for download
3. Enter EVA5000 in the enter model product number field.
4. Select the folder in which you want to save the file when presented with the
Save As dialog box.
Note: The folder you select must be large enough to store the OS kit selected. File size
ranges from 17 to 70 MB depending on the operating system selected.
The Platform Kit software is available as a .iso or .zip file. After you download
and uncompress the files, your options are:
■ Create a CD-ROM using the .iso file.
■ Copy the .zip file to the server that runs the Platform Kit software.
Uncompress the file and run the install program on the server.
Installing the Storage System Scripting Utility
The following SSSU install procedure assumes that you have loaded the web kit to
a CD-ROM.
If you are re-installing SSSU, remove the older version with the command:
# swremove SSSU.
1. Insert the HP-UX Kit V3.0B for Enterprise Virtual Array CD-ROM.
2. Find the CD-ROM device (c3t2d0 in the example shown in step 3) in your
downloaded web kit by entering:
# ioscan -fnuCdisk
The output will look similar to the following:
Class I H/W Path DriverS/W State H/W Type Description