HP StorageWorks EVA iSCSI Connectivity Option 5.1 release notes (5697-7321, January 2008)

symmetric-option = 0x1000000;

LUN 0 is automatically presented by Comma nd View whenever a Virtual Disk is presented to an iSCSI

host iqn.

Workaround

After presenti

ng any LUN to the Solaris server iqn using Command View, the user must remove LUN 0

from the Solari

s iqn entr y for ea ch iSCSI presented target on the mpx100:

1. UseTelnettoconnecttothempx100managementport,orconnecttothempx100serialportusing

the HP-supplied connector.

NOTE:

The mpx100 management port’s default IP address is 10.0.0.1/255.0.0.0. The mpx100

serial port’s default setting is 115200/8/n/1.

2. To log in, enter:

•Username:guest

•Password:password

3. To enable administrator privileges, enter:

•

admin start

•

config

4. Enter the lunmask rm command and follow the prompts to remove the Solaris iSCSI initiator from

each iSCSI presented target:

For example:

> telnet 10.6.7.65

password: password

>admin start

password: config

mpx100 (admin) #> lunmask rm

Index (WWNN,WWPN/iSCSI Name)

— ——— —————————————

0 50:00:1f:e1:50:00:2f:70,50:00:1f:e1:50:00:2f:7e

Please select a Target from the list above ('q' to quit): 0

LUN Vendor

— ——— —

0HP

1HP

2HP

3HP

4HP

EVA iSCSI Connectivity Option 5.1