HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 4.100) (5697-7055, November 2007)

Using the OCP on the HSV controller:
1. Press
to leave the default display.
2. Press
three times to scroll to System Password.
3. Press
to select S ystem Password.
4. Press
to display CHANGE PASSWORD? NO.
5. Press
to display CHANGE P ASSWORD YES.
6. Press
to accept YES and go to step 7.
7. Press eit
her
or to select an uppercase or lowercase character.
8. Press
to
accept a character and select the next password character. The character display
changes to an asterisk.
9. Repeat step 7 and step 8 for the remaining seven characters.
10. Press
to accept the password.
The password is changed. The system automatically returns to the d efault display.
11 . Enable password access to the storage system in HP Command View EVA.
Enabling password access in HP Command View EVA
Estim
ated time to complete: 10 minutes
After entering a password on the OCP, you must enable password access in HP Command View EVA. To
enable password access to a storage system, perform the following steps:
1. Start HP Command View EVA in your browser.
2. Clic
k Server O ptions in the Session pane.
The Mana gement Agent Options page o pens.
3. Click Storage system password access.
The S
torage System Password Access page opens.
4. Click Enable.
The Enable Password Access to a Storage System page opens.
38
Upgrading the Enterprise Virtual Array