HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 4.100) (5697-7055, November 2007)

Figure 18 Code Load Disk Drives — Page 3 win dow

Upgrading ﬁrmware on an individual disk

If it is necessary to upgrade the ﬁrmware on an individual disk, the ﬁrmware and installation instructions

can be downloaded from the following web site:

ttp://www.hp.com/sup port/evadiskﬁrmware

Step 7. Entering storage system passwords

Estima

ted time to complete: 10 minutes

NOTE:

This step is only required if you use password protection on the storage system.

Use the following procedure to add a password to the HSV controller pair.

NOTE:

When you add a system password to the controller, you must also enable password access in HP

Command View EVA. The two work in conjunction with one another.

Entering the password on the OCP

Using the followi ng procedure to enter the password on the storage system controllers. The password

can b e entered from either controller.

HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 4.100)