HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 4.100) (5697-7055, November 2007)

7. Press to clear the password .
The password is
cleared. The system automatically returns to the default display ( WWID).
8. Disable password access to this storage system in HP Command View EVA.
Disabling password access in HP Command View EVA
Estimated time to complete: 10 minutes
To disable password access to a storage system in HP Command View EVA, perform the following steps:
1. Start HP Command View EVA in your browser.
2. Click Ser ver O ptions in the Session pane.
The Mana gement Agent Options page o pens.
3. Click Storage system password access.
The Storage S ystem Password Access page opens.
4. Click Disable.
The Disable Password Access to Storage Sy stem page opens.
5. SelectthestoragesystemWorldWideNodeNamefromthedrop-downlist.
NOTE:
Make sure you select the storage system from which you cleared passwords using the
OCP on the HSV controller.
6. Click Disable Password.
Aconfirmation box opens.
7. Click Yes to disable the password.
Step 4. Halt all host access to the storage system (optional)
Estimated time to complete: Varies. M ust be performed for each host ac cessing the storage system.
Online upgrade is supported from VCS 4.00x. Bec ause of the minimal disruption to system operation,
the online procedure is recommended. If the upgrade will be performed offline, all host I/O to the
storage system must be stopped. Stop a ll applications accessing the storage system and shutdown
hosts if necessary.
CAUTION:
An online upgrade requires a 60 second controller resynch du ring which the storage system is
unavailable. Make sure all applications and operating systems can accommodate this interval when
performing on online upgrade.
Step 5. Upgrading system software to VCS 4.100
Estimated time to complete: 30 minutes
28
Upgrading the Enterprise Virtual Array