HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 4.100) (5697-7055, November 2007)

Step 2. Disabli
ng ISEE and SNMP
Estimated time to complete: 15 minutes
To avoid the generation of unnecessary events and aler ts during the upgrade, you should disable ISEE
and SNMP while performing the upgrade.
Disabling ISEE
If you are running ISEE, disable it as follows to avoid generating unnecessary alerts during the upgrade:
1. On the management server, open a command window.
2. Enter the following command to stop ISEE:
C:\>DESTA ISEE OFF
3. Enter the following commands to stop and restart W EBES:
C:\>net stop desta_service
C:\>net start desta_service
4. Enter Exit.
Step 3. Clea
ring storage system passwords
Estimated time to complete: 10 minutes
NOTE:
This step is only required if you have password protection on the storage system.
If you use passwords on the HSV controllers, clear the passwords before you upgrade HP Command View
EVA. You can reestablish the passwords after you complete the HP Command View EVA upgrade. Use
the following procedure to clear the storage system passwords on the HSV controllers.
NOTE:
When you clear a system password on the controller, you must also disable password access from the HP
Command View EVA used to manage this storage system. The two work in conjunction with one another.
Clearing the password on the OCP
Using the
Operator Control Panel (OC P ) on the HSV Controller:
1. Press
to leave the default display.
2. Press
three tim es to scroll to System Password.
3. Press
to select System Password.
4. Press
to display Clear Password.
5. Press
to select Clear Passw ord.
The O
CP displays CLEAR PASSWORD? NO.
6. Press
.
The OCP displays CLEAR PASSWORD? YES?
HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 4.100)
27