HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 4.100) (5697-7055, November 2007)

NOTE:
If you must replace any components, see the H P StorageWorks 3000/5000 Enterprise Virtual Array user
guide for replacement instructions. See Table 3 on page 13 for the link to this guide.
Migrating to HP Storage Essentials
Estimated time to complete: Varies
When to perform: Any time prior to the upgrade
If you are using HP SANworks Network View software or HP OpenView Storage Area Manager (including
Storage Node Manager), it is recommended you migrate to HP Storage Essentials. Contact your
HP-authorized sales or support representative for m ore information on migrating to HP Storage Essentials.
Monitoring storage system stability
Estimated time to complete: 30 minutes
When to perform: 48 hours before beginning the upgrade
The storage system configuration should be stable for 48 hours before beginning the upgrade. Check the
status of the a rray to ensure it is stable and then continue monitoring status until the upgrade begins.
1. Open HP Command View EVA and click the icon of the storage system you want to upgrade.
2. Using HP Command View EVA, examine the controller event log and check for any critical events.
a. Select the icon of the storage system you want to upgrade in the Navigation pane.
b. Click View Events.
TheViewEventspageopens.
c. Click Controller Event Log.
The Controller Events page opens in a new browser window.
d. Check the Severity field to determine if any unexpected C ritical events
have occurred.
HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 4.100)
19