HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 3.110) (5697-8108, March 2009)

1. Start HP Command View EVA in your browser.
2. Click Agent Options in the Session pane.
The Management Agent Options window opens.
3. Click Storage system password access.
The Storage System Password Access window opens.
4. Click Disable.
The Disable Password Access to Storage System window opens.
5. Select the storage system World Wide Node Name from the drop-down list.
NOTE:
Make sure you select the storage system from which you cleared passwords using the OCP
on the HSV controller.
6. Click Disable Password.
A confirmation box opens.
7. Click Yes to disable the password.
Step 4. Halting all host access to the storage system for an
offline upgrade (optional)
Estimated time to complete: Varies. Must be performed for each host accessing the storage system.
Online upgrade is supported from VCS 3.110. Because of the minimal disruption to system operation,
the online procedure is recommended. If the upgrade will be performed offline, all host I/O to the
storage system must be stopped. Stop all applications accessing the storage system and shut down
hosts, if necessary.
Step 5. Upgrading controller firmware to VCS 3.110
Estimated time to complete: 25–30 minutes
CAUTION:
Before upgrading the controller firmware, ensure that the storage system configuration is stable and
is not being changed in any way. If any configurations changes are in progress, monitor them using
HP Command View EVA and wait until they are completed before proceeding with the upgrade.
Upgrading controller firmware
To upgrade the controller firmware:
1. Open HP Command View EVA in your browser.
HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS
3.110) 43