HP StorageWorks 3000/5000 Enterprise Virtual Array Connectivty 3.1A for Sun Solaris Release Notes (5697-6384, June 2007)

Sun Solaris 10 requires the minimum version of Secure Path (3.0D SP1).

Single-path support

ASunSolarisse

rver requires a single Fibre Channel Adapter (FCA) to support single-path mode.

NOTE:

Single-path mode should not be used in mission-critical environments. To conﬁgure Sun Solaris in

single-pathmode,youmustuseHSG80SolutionSoftware8.7AforSunSolarisconnectivity.

Compatibility/Interoperabilit y

Switch support

This release supports the Fibre Channel (FC) switches and ﬁrmware versions listed in the HP StorageWorks

SAN design reference guide, available for download on the HP support website:

ttp://www.hp.com/support/m anuals

Under storage, click Storage Networking, and then select HP StorageWorks SAN under HP StorageWorks

SAN Solutions.

NOTE:

HP recommends that you do not mix switch ﬁrmware versions in your SAN. It is considered a best

practice to uniformly upgrade all switches in the SAN.

HP StorageWorks Storage System Scripting Utility

The latest version of the HP Storage System Scripting Utility (SSSU) is available on the software

downloads

website:

ttp://www.hp.com/support/downloads

Under storage, click Storage software, and then sele ct HP Storag eWorks Command View EVA Software

under Storage Device Management Software. Select the version of the HP StorageWorks Command View

EVA Media

Kit you want to download.

Important notes

Using conﬁg.sh to install an HSV110

When you use config.sh from the Fcraid manager to install an HSV110 on a system with an HSG80,

some paths to the storage m ay be undetected. Before installing Secure Path, run devfsadm to detect all

conﬁgured paths. Afterwards, run spconfig to correctly conﬁgure your system.

Secure Path version

VCS 3.110 requires the latest version of Secure Path for your operating system. The current version of

Secure Path for your operating system c a n b e found at the following website:

ttp://h18006.www1.hp.com/products/sanworks/secure-path/index.html