HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity for Tru64 UNIX installation and reference guide (5697-7045, November 2007)

Updating the Tru64 UNIX driver

The FC HBA driver is automatically updated when the patch kit

is loaded. Y

ou can locate the patch at the following web site:

ttp://h30

097.www3.hp.com/docs/patch

Adding new FCAs on an existing Tru64 UNIX operating

system

To add an FCA to an existing Tru64 UNIX operating system after the latest patch kit is installed:

1. Boot genvmunix from the SRM console:

P00>>>boot -file genvmunix

2. Rebuild the kernel, copy the new kernel to /vmunix, and reboot the system. In the following

example, PRIV4 is the system’s host name.

#doconfig

#cp /sys/PRIV4/vmunix /vmunix

# reboot

Using HP StorageWorks Command View EVA and Storage

System Scripting Utility

The Storage System Scripting Utility (SSSU) is delivered as part of HP StorageWorks Command View

EVA. The SSSU is a command line interface you can use to issue commands directly to the controller.

The lates

tversionoftheSSSUisavailableonthesoftwaredownloadswebsite:

ttp://www.hp.com/support/download s .

Under Storage, click Storage Software and then select HP StorageWorks Command View EVA Sof tware

under Storage Device Management Software. Select the version of HP StorageWorks Command View

EVA Medi

aKityouwanttodownload.

Working with clusters

Clustering is conne cting two or more computers together in such a way that they behave like a single

computer. Clustering is used for parallel processing, load balancing, and fault tolerance.

The supported clustering soft ware for Tru64 UNIX is TruCluster.

For the latest version of the supported clustering software, see HP StorageWorks 3000/5000 Enterprise

Virtual Array conne ctivity for Tru64 UNIX release notes.

HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity for Tru64 U NIX installation and

reference guide