HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity for Sun Solaris installation and reference guide (5697-7044, November 2007)

• Verify all cabling to the switch, Enterprise Virtual Array, and host.
• Verify all firmware levels (check the associated Enterprise Virtual Array release notes for details).
• Ensure tha t you a re running a supported version of the host operating system (see the release
notes included with this kit).
• Ensure that the correct host is selected for this virtual disk and that a unique OS Unit ID is used in
the HP Command View EVA.
• Ensure that Sun Solaris is selected as the operating system for the virtual disk in the HP Command
View EVA.
Configuring vir tual disks from the host server
After you create and verify the virtual disks on the EVA3000/5000, and then rescan or restart the host
server, you must configure the new disk resources. See your host server documentation for instructions
on configuring disk resources.
Use the Sun Solaris format utility for disk configu ration.
12
Testing connections to the EVA 3000/5000