HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity for OpenVMS installation and reference guide (5697-7043, November 2007)

Scanning the bus
Use the followi
ng procedure to scan the bus and display information about the Enterprise Virtual Array
devices:
After config uring the virtual disks through the HP Command View EVA, rescan the bus with the following
command:
$ MC SYSMAN IO AUTO
NOTE:
The Enterprise Virtual Array console LUN can be seen without any virtual disks presented. The console
LUN displays as
$1$GGAx (where x representsthenumberoftheconsoleLUNIDonthecontroller).
The system scans the fabric for devices and then you can verify them with the following SHOW DEVICE
command:
$ SHOW DEVICE NAME-OF-VIRTUAL-DISK/FULL
For example, to display device information on a virtual disk named $1$DGA50,usethefollowing
command:
$ SHOW DEVICE $1$DGA50:/FULL
The following output is displayed:
Disk $1$DGA50: (EIGHT), device type HSV110, is online, mounted,
file-oriented device, shareable, served to cluster via MSCP Server, error
logging is enabled.
Error count 0 Operations completed 96
Owner process "" Owner UIC [SYSTEM]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W
Reference count 1 Default buffer size 512
Current preferred CPU Id 0 Fastpath 1
WWID 01000010:6005-08B4-0000-0020-0015-E000-0037-0000
Total blocks 10485760 Sectors per track 128
Total cylinders 640 Tracks per cylinder 128
Allocation class 1
I/O paths to device 4
Path PGB0.5000-1FE1-0013-A0B9 (EIGHT), primary path, current path.
Error count0 Operations completed19
Path PGB0.5000-1FE1-0013-A0BC (EIGHT).
Path PError count0 Operations completed19
GE0.5000-1FE1-0013-A0B8 (EIGHT).
Error count0 Operations completed19
Path PGE0.5000-1FE1-0013-A0BD (EIGHT).
Error count0 Operations completed19
Volume label "E1DISK" Relative volume number 0
Cluster size 11 Transaction count 1
Free blocks 10485310 Maximum files allowed 436906
Extend quantity 5 Mount count 1
Mount status System Cache name "_$8$DKB200:XQPCACHE"
Extent cache size 64 Maximum blocks in extent cache 1048531
Quota cache size 0 Maximum buffers in FCP cache 690
Volume owner UIC [SYSTEM] Vol Prot S:RWCD,O:RWCD,G:RWCD,W:RWCD
Volume Status: ODS-2, subject to mount verification, file high-water
marking,write-back caching enabled.
You can also use SHOW DEVICE to display only the Fibre Channel (FC) virtual disks. The syntax for
showing the F C virtual dis ks only follows:
HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity for OpenVMS installation and
reference guide
15