HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity for Linux installation and reference guide (5697-7041, November 2007)

NOTE:

The RPM command contains the RPM build functionality in some of the older Linux distributions.

At the end of the command output there is a line that displays the following message:

"Wrote: ...rpm".

This line displays the location of the binar y RPM.

4. Copy the binar y RPM to the production servers and install it using the following com m a nd:

# rpm -ivh hp_qla2x00-version-revision.architecture.rpm

Multipathing

Secure Path and multipathing software provide a multiple-path environ ment for your o perating system.

More information is available at the following websites:

ttp://h18006.www1.hp.com/products/sa nworks/secure-path/index.html

http://h18006.www1.hp.com/products/sanworks/multipathoptions/index.html

Storage System Scripting Utility

The Storage System Scripting Utility (SSSU) is part of HP Command View EV A. The SSSU is a command

line interface (CLI) that issues commands directly to the controller. You can locate the SSSU at the

follo wing web site:

ttp://h18006.www1.hp.com/products/storage/software/cmdvieweva/index.html

Host connectivity