HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity for IBM AIX installation and reference guide (5697-7040, November 2007)

• Verify all cabling to the switch, Enterprise Virtual Array, and host.
• Verify all firmware levels (check the associated Enterprise Virtual Array release notes for details).
• Ensure you are running a supported version of the host operating system. Refer to the host-specific
release notes.
• Ensure IBM AIX is selected as the operating system for the virtual disk in HP Command View EVA.
Configuring virtual disks from the host
After you set up the virtual disks on the Enterprise Virtual Array and have rescanned or restarted the host,
follow the host-specificconventionsforconfiguring these new disk resources. Refer to the documentation
that came with your server for specific instructions on setting up disk resources.
HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity for IBM A IX installation and reference
guide
13