HP StorageWorks 3000/5000 Enterprise Virtual Array Connectivity 3.1A for Novell NetWare Release Notes (5697-6382, June 2007)

Single-path sup
port
Novell NetWare servers require a single Fibre Channel Adapter (FCA) to support single-path mode.
NOTE:
Single-path mode should not b e used in mission-critical environments.
Compatibility/Interoperabilit y
Switch support
This release supports the Fibre Channel switches and firm ware versions listed in the HP StorageWorks
SAN design reference guide, which can be downloaded from the HP support we bsite:
h
ttp://www.hp.com/support/manuals
Under storage, click Storag e Net working, and then select HP Stora g eWorks SAN under H P StorageWorks
SAN Solutions.
NOTE:
HP recommends that you do not mix switch firmware versions in your SAN. It is considered a best
practice to uniformly upgrade all switches in the SA N.
Server supp
ort
AllNovellNetwarecertified servers are supported.
HBA drivers
To download the latest HBA drivers for storage arrays, see the HP Storage website at:
h
ttp://h18006.www1.hp.com/storage/sanin frastructure.html
HP Storage
Works Storage System Scripting Utility
The latest
version of the HP Storage System Scripting Utility (SSSU) is available on the soft ware
downloads website:
h
ttp://www.hp.com/support/downloads
Under stor
age, click Storage software, and then select HP StorageWorks Command View EVA Software
under Stor
age Device Management Software. Select the version of the HP StorageWorks Command View
EVA Media Kit you want to download.
Important notes
SSSU
Changing comments on a disk enclosure
Use Command View EVA to change comments on a disk enclosure. If you try to change a disk enclosure
comment using SSSU, the following error message appears:
Error: Invalid Operation
4