HP StorageWorks Hardware Providers for VDS/VSS Installation Guide

Using the HP P6000 VSS configuration utility
You use the VSS configuration utility to configure the snap type, disk group, and Vraid type for shadow
copy creation of a disk group.
To start the VSS configuration utility, select Start > Programs > Hewlett-Packard > Hardware Providers
> VSS Configuration Utility for P6000.
The utility can also be executed from a command window by running hpevavsscfg.exe, located
in Program Files\Hewlett-Packard\HardwareProviders\P6000\VSS.
Figure 5 VSS configuration utility window
.
To select a snap type:
1. In the utility window, enter the IP address or name of the Command View EVA server in the
P6000 Command View Server name or IP address box and then click Logon to log on to the
server with your user name and password.
2. Select a storage system from the P6000 Storage System list.
HP StorageWorks Hardware Providers VDS/VSS Installation Guide 19