Insight Environmental Configuration User Guide

Creating a project 59
Icon Calculation Description
Average operation Calculates the average of associated power sources.
Sum operation Calculates the sum of associated power sources.
User input
Insert a fixed value or known value, such as the amount
of power consumed, as displayed on a utility statement.
Rated power loss
(output)
Simulates equipment with a rated power loss (such as a
transformer or UPS) where the only known value is the
output or secondary power. The device uses an
efficiency table ("Updating the efficiency table" on
page 62) to then calculate the input or primary power
and power loss.
Rated power loss (input)
Simulates equipment with a rated power loss (such as a
transformer or UPS) where the only known value is the
output or secondary power. The device uses an
efficiency table ("Updating the efficiency table" on
page 62) to then calculate the output or secondary
power and power loss.
3 phase current to kW
Converts 3-phase power current values from amps,
volts, or power factor info power metrics (kW).
Less-than filter
Accepts an input and then replaces it with a default
value if the input value is less than the specified
minimum value.
Addition Performs addition on two sets of input.
Subtraction Performs subtraction on two sets of input.
Multiplication Performs multiplication on two sets of input.
Division Performs division on two sets of input.
Exp Raises the value to the power of the second value.