Insight Environmental Configuration User Guide

Creating a project 51
5.
On the Groupings tab, select the new BCMS object to configure the properties for the BCMS sensor.
6. Repeat for all BCMS sensor locations.
Adding an ION power meter object
An ION power meter, also referred to as a kWh energy base station, measures the power consumption of
a specific device or location. Two ION objects are available in the Configurator:
• ION Wye—Used when the measured power line uses a Wye connection.
• ION Delta—Used when the measured power line uses a Delta connection.
NOTE: You must have a Modbus/TCP Network data source in order to add this object to
your floor plan. For more information, see Creating a Modbus/TCP data source (on page
19).
To add an ion sensor object to your floor plan: