Brocade Fabric OS Encryption Administrator's Guide Supporting Fabric OS v6.2.0 (53-1001201-04, May 2009)

56 Encryption Administrator’s Guide
53-1001201-04
Configure Encryption for HP SKM key vaults
2
Importing a signed certificate into a switch
Use the following procedure to import the signed certificate described in “Obtaining a signed
certificate from the HP SKM appliance software” on page 54 into an encryption switch.
1. Select the switch from the Configure Encryption dialog box, and click the Properties button.
FIGURE 40 Switch Properties dialog box
2. Click the Import button.
The Import Signed Certificate dialog box displays.
FIGURE 41 Import Signed Certificate dialog box
3. Type the full path or browse to the location of the stored, signed certificate, and click OK.
The signed certificate is imported into the switch.