Brocade Fabric OS Encryption Administrator's Guide Supporting Fabric OS v6.2.0 (53-1001201-04, May 2009)

Encryption Administrator’s Guide 53
53-1001201-04
Configure Encryption for HP SKM key vaults
2
14. Click Next to confirm the displayed information.
The Configuration Status displays, as shown in Figure 37.
• A progress indicator shows that a configuration step is in progress. A green check mark
indicates successful completion of all steps for that Configuration Item. A red stop sign
indicates a failed step.
• All Configuration Items have green check marks if the configuration is successful. A
message displays below the table, indicating that the encryption switch was added to the
group you named, and the public key certificate is stored in the location you specified.
FIGURE 37 Configuration Status dialog box
15. Click Next.
The Next Steps dialog box displays instructions for installing public key certificates for the
encryption switch. These instructions are specific to the key vault type. Copy or print these
instructions.