Brocade Fabric OS Encryption Administrator's Guide Supporting Fabric OS v6.2.0 (53-1001201-04, May 2009)

50 Encryption Administrator’s Guide
53-1001201-04
Configure Encryption for HP SKM key vaults
2
6. Enter a name for the encryption group. The maximum length of the group name is 15
characters. Letters, digits, and underscores are allowed.
7. Cli ck Next.
The Select Key Vault dialog box displays.
FIGURE 33 Select Key Vault dialog box
a. Select HP Secure Key Manager (SKM) from the Key Vault Type list.
b. Enter the IP address or host name for the primary key vault.
When a new key vault IP address or host name is entered, you must also enter the name of
the file that holds the primary key vault’s public key certificate (or browse to the location by
clicking the Browse button).
c. Enter the name of the file holding the primary key vault’s public key certificate.
SKM key vaults are always implemented in a cluster of two or more key vaults. If you are
registering a second key vault, also enter the IP address or host name, and the name of
the file holding the second key vault’s public key certificate in the fields provided.
See the notes in “Key vault address changes” on page 41 before you add, change, or
remove key vaults.
8. Click Next.
The Specify Public Key Certificate Filename panel displays.