Brocade Fabric OS Encryption Administrator's Guide Supporting Fabric OS v6.2.0 (53-1001201-04, May 2009)

44 Encryption Administrator’s Guide
53-1001201-04
Configure Encryption for LKM key vaults
2
FIGURE 26 Select Key Vault dialog box
a. Select NetApp Lifetime Key Manager (LKM) as the Key Vault Type.
b. Enter the IP address or host name for the primary key vault.
When a new key vault IP address or host name is entered, you must also enter the name of
the file that holds the primary key vault’s public key certificate (or browse to the location by
clicking the Browse button).
c. Enter the name of the file holding the primary key vault’s public key certificate.
If you are using a backup key vault, also enter the IP address or host name, and the name
of the file holding the backup key vault’s public key certificate in the fields provided.
8. Click Next.
The Specify Public Key Certificate Filename panel displays.
FIGURE 27 Specify Public Key Certificate filename dialog box
9. Specify the name of the file where you want to store the public key certificate that is used to
authenticate connections to the key vault, and click Next.
The key authentication center (KAC) certificate, created during node initialization, is exchanged
with the NetApp LKM key vault. The LKM KAC certificate is in PEM format.