Brocade Fabric OS Encryption Administrator's Guide Supporting Fabric OS v6.2.0 (53-1001201-04, May 2009)

Encryption Administrator’s Guide 21
53-1001201-04
Viewing and editing group properties
2
FIGURE 7 Encryption Group Properties dialog box
General tab
The properties displayed in the General tab are described below.
• Encryption group name - the name of the encryption group.
• Group status - the status of the encryption group, which can be OK-Converged or Degraded.
Degraded means the group leader cannot contact all of the configured group members.
• Deployment mode - the group’s deployment mode, which is transparent.
• Failback mode - The group’s failback mode, which can be automatic or manual. For Fabric OS
versions earlier than 6.2.0, the failback mode must be set manually using the CLI.
• Key vault - the vault type, either RSA Key Manager (RKM) NetApp Lifetime Key Manager (LKM),
or HP Secure Key Manager (SKM). The master key must be backed up for the RSA and HP SKM
key vaults, but not for the LKM key vault.
• Primary key vault IP address - The IP address of the primary key vault, either IPv4 or host
name.
• Backup key vault IP address - the IP address of the backup key vault.
• Primary key vault certificate - the details of the primary vault certificate; for example, version
and signature information.
• Backup key vault certificate - the details of the backup vault certificate; for example, version
and signature information.