HP StorageWorks Enterprise Modular Library E-Series User Guide (AH876-96001, September 2007)

CAUTION:
Guard plates prevent acc ess to the inside of the library when a load port magazine is
removed. These doors will move back out of the way when a magazine is reinserted. You
should not attempt to otherwise move these guards, nor gain access to the library through
the load ports.
Replacing a load port magazine
1. Align the magazine with the top and bottom track on the load port door, and slide the magazine
through the spring door and fully into the load port.
2. Close the load port door.
3. After all load port doors are closed, the library d o es an inventory of the loa d ports.
10443
Figure 56 Inser ting a magazine into the loa d port
98
Removing and replacing parts