HP StorageWorks Enterprise Modular Library E-Series User Guide (AH876-96001, September 2007)

ASpecifications an d characteristi cs
This appendix describes the physical, electrical, and environmental characteristics of the library.
Library component specifications
Table 29 Library component s pecifications
Characteristic
Specification
HP 10642 rack with 1 PDU
Physical:
Weight 114.84 kg (253 lb)
Dimensions (HxDxW) 199.9 x 100.8 x 61.0 cm (78.7 x 39.7 x 24 in)
Electrical:
AC voltage range
200–240 V, 50/60 Hz
Load capacity
3680 VA (@ 230 V AC)
Base module (12U) with 1 power supply, 2 tape drives, and robot (base module consists of base
unit (8U) and tape drive expansion module (4U)
Physical:
Weight, base module 45 kg (98 lb)
Weight, tape drive expansion module 20.5 kg (44.8 lb)
Dimensions (HxDxW), base mo dule
35.6 x 81.1 x 48.0 cm (14.0 x 31.9 x 18.9 in)
Dimensions (HxDxW), tape drive expansion
module
17.8 x 81.1 x 48.0 cm (7.0 x 31.9 x 18.9 in)
Electrical:
Power rating
2 A (at 200 VAC) combined max peak
Card cage expansion module (4U)
Physical:
Weight (with 1 power supply and 3
interface controllers)
20 kg (43.8 lb)
Dimensions(HxDxW) 17.8x76.3x48.0cm(7.0x30.0x18.9in)
Electrical:
Power rating
1.25 A (at 200 VAC)
Tape drive expansion module (8U) with 1 power supply and 4 tape drives
Physical:
Weight 41 kg (90.0 lb)
Dimensions (HxDxW ) 35.6 x 81 .1 x 48.0 cm (14.0 x 31.9 x 18.9 in)
Electrical:
Input power
288 Watts
Enterprise Modular Library E-Series
103