HP StorageWorks Enterprise Modular Library E-Series user guide (AH876-96001, October 2007)

HP StorageWorks

Interface Manager card

Part Number

342213-001 or 393531 -001

Location

Bottom slot in t

he base-module card cage

Characteristics

Contains six Ethernet connections to the library robotics controller,

four interface controllers, and the SAN; two 3-pin serial ports;

status, activity, and error LEDs

Function

Manages the interface controllers in order to monitor and

manage the library

Illustratio

10463

Required tools

• #1 Phillips screwdriver

Removing t

he Interface Manager card

1. Use your backup software to stop all library activity and make sure the picker is empty.

2. Turn off the power to the library.

3. Identif

y the Interface Manager card. It is located in the bottom slot in the card cage in the base

module.

4. Label the cables or write a note that shows the locations of all the cables plugg ed into the Interface

Manager

card to make it easier to reconnect them later.

5. Unplug

all cables from the Interface Manager card.

6. Loosen

the captive screws in the ejector handles at both ends of the Interface Manager card. Use a

#1 Phillips screwdriver.

7. Push the ejector handles to the outside.

8. Pull t

he ejector handles to remove the Interface M anager card from the library.

Enterprise Modular Library E-Series