HP StorageWorks Enterprise Modular Library E-Series user guide (AH876-96001, October 2007)

11594
1 2
2
3
4
Figure 41 Indicators on the switch for the interna l network
Table 15 Indicators on the switch for the internal network
Index
No.
Control/indicator
Function
1
Power (gree
n)
On—The switch is receiving power.
nl
Off—The switch is not receiving power.
2
LED Mode Select (2
green LEDs)
FDx—Indicates that the port Mode LEDs are displaying whether the ports
are o perating in full-duplex.
nl
Speed–Indicates that the port Mode LEDs are displaying the operating
speed.
nl
Press the
button next to the indicators to change from one mode to the
next. For
more details, see the Mode indicator below.
3
Link/Act
On—The port is enabled and receiving a link indication from the
connected device.
nl
Off—The p
ort has no active network cable connected, or is not receiving
link sign
al.
nl
Flashing—Indicates that there is network activity on the port.
4
Mode
FDx—When
the FDx (full duplex) indicator LED is on, the port Mode
LEDs tur
n on for those ports that are operating at full duplex.
nl
Speed—When the Speed indicator LED is on, the port Mode LEDs for
ports1–22arelitforportsthatarein100Mbpsmodeandareofffor
ports operating at 10 Mbps. The port Mode LEDs for ports 23–24, are
lit for ports that are in 100 or 1000 Mb ps m ode or are off for ports
operating at 10 Mbps.
Librar
ymainpowerswitch
Enterprise Modular Library E-Series
61