HP StorageWorks Enterprise Modular Library E-Series user guide (AH876-96001, October 2007)

CAUTION:

Guard plates prevent acc ess to the inside of the library when a load port magazine is

removed. These doors will move back out of the way when a magazine is reinserted. You

should not attempt to otherwise move these guards, nor gain access to the library through

the load ports.

5. Insert the tape car tridges into any available slots in the magazine.

CAUTION:

Excessiveforcewheninsertingamagazinecancauseatapecartridgetounseatand

extend into the path of the robot.

6. Align the magazine with the track on the load port door and gently slide the magazine through the

spring door and fully into the load port.

7. Close the lo

ad port door.

8. After all load port doors are closed, the library d o es an inventory of the loa d ports.

10443

Figure 27 Inserting a ma gazine into the loa d po rt

Using the OCP

The OCP is an LC D screen located on the front of the library that is operated by touch. The icons, text,

and tabs on the OCP allow you to obtain information about the library, execute library c om m a nds, and

test library functions.

OCP icons

The fol

lowing table displays icons that can appear on the OCP.

Using the library