HP StorageWorks EML E-Series Ultrium 1840 tape drive moduleupgrade or replacement service guide (AH682-96001, October 2007)

3.7 Configure the SAN switch
Rezone the SAN, if n ecessary, to account for the new tape drive and
paths.
Reboot the SAN FC switch if necessary .
3.8 V erify conn
ectivity
11558
26
Verify that the Fibre Channel port A LED on the new tape drive is green
when connected to a switch and linked.
3.9 Close the doors
10545
Close the back doors of the library.
3.10 Upgrade the tape drive firmware
Ensure that the tape drive has the latest firmware for correct operation.
If necessary, upgrade the drive firmware using the Command View
TL firmware upgrade wizard or the Inter face Manager’s Command
Line Interface. See the HP StorageWorks Interface Manager and
Command View TL User’s Guide for detailed procedures on upgrading
drive firmware.
Page 3