HP StorageWorks EML E-Series Tape Library Internal Network Kit Installation and Replacement Instructions (AJ001-96001, September 2007)

3Unplugtheswitchfromthepowerstrip
11572
2
6
4 Label the cables plugged into the
switch
11573
Label the cables or write a note tha t shows the locations of a ll the
cables plugged into the switch to make it easier to reconnect them later.
5 Unplug all cables from the switch
11574
6Removetheswitchfromtherack
11575
Remove the screws that attach the switch to the cabinet with a #2
Phillips screwdriver and remove the switch from the rack.
7Unplugth
e power cord from the back
of the swit
ch
11650
8 Remove the brackets from the switch
11576
Use a #2 Phillips screwdriver.
Page 2